Please click to enlarge image(s)
Miniature £12.10 (Inc. Vat)
UN Mission in Ethiopia and Eritrea UNMEE Miniature.
Date: 2000-08
Campaign: United Nations Mission in Ethiopia and Eritrea. Read more on the Official United Nations Peacekeeping Missions website; UNMEE Official Page.
Branch of Service: UN forces.
Ribbon: Pale blue with central band of sand bisected by narrow dark green stripe.
Description: (Obverse) the wreathed globe emblem surmounted by the letters UN; (reverse) inscribed “IN THE SERVICE OF PEACE”.
| INFO | Source – http://www.un.org/en/peacekeeping/sites/medals/unmee.htm The Mission was established on 15 September 2000 by the adoption of the Security Council Resolution 1320. The main goals of the Mission are to monitor the cessation of hostilities, to assist in ensuring the observance of the security commitments agreed by the parties, to monitor and verify the redeployment of Ethiopian forces from positions taken, to monitor the positions of Ethiopian forces once redeployed and the positions of Eritrean forces. The UNMEE medal was established in January 2001. The ribbon has two outer bands of UN blue, symbolizing the presence of the United Nations. The inner band in green symbolizes hope and fertility of the land. The two bands in tan symbolize religious freedom and the ruggedness of the country. Qualifying time of service for the reception of UNMEE medal is 90 days. Following countries participate in the Military and the Civilian Police component of UNMEE: Algeria, Austria, Bangladesh, Canada, China, Finland, Ghana, India, Italy, Jordan, Kenya, Malaysia, Nepal, Netherlands, Norway, Peru, Poland, Romania, Spain, Sweden, Switzerland, Tunisia, Ukraine, the United Republic of Tanzania, Uruguay and Zambia. |
|---|
Medals are mounted in accordance with the latest Tri-Service regulations (single uniform code) unless you specify otherwise in the “Additional Comments” section of the order form. This is especially important if you are still in uniform.
There are two styles of medal mounting available.
Medal mounting swing style is the more traditional method of mounting medals. Swing Style or ordinary style mounted medals are mounted on a medal brooch bar which can then be pinned to your tunic directly, through becketts or attached to a pocket holder. This style of medal mounting allows the medals to move or ‘swing’ when worn. Over time, the edge of the medals can become damaged due to the medals “clinking” together.
Medal mounting court style is alleged to have began during the reign of Queen Victoria. Those attending the Queen would wear medals court mounted to stop them “clinking”. Other sources suggest that the Cavalry first adopted the practice. Either way, this style of medal mounting is becoming more popular. Court mounted medals are fixed to a rigid backing material called buckram. The buckram is then covered in a felt material before the medals are mounted on their own ribbon length. This style of medal mounting holds the medals firmly in place and prevents them ‘clinking’ together and damaging each other when worn.
Please note – Commemorative medals manufactured by Bigbury Mint are presented “ready for wear” already swing mounted. There will therefore be nil additional cost when swing style as a single medal is selected.
Bigbury Mint mount medals in accordance with the latest guidance from the Central Chancery Of The Orders Of Knighthood, as listed in the London Gazette.
A basic pictorial representation is given as follows;
Please note – medals not to scale and are for illustration purposes only.
Commemorative medals should not be mounted on the same row as Official medals.
Russian Medals can be mounted in their native Style, individually or as part of a medal group at extra cost;
We have two options available to display medals in the frame;
Medals are mounted ready for wear and then placed on a block within the frame. This allows for the easy removal and replacement of the medals as required, meaning they can be removed for wear on parade or for cleaning.
The medals will hang from the block at a slight angle much as they would if they were being worn on the chest.
Medals are not mounted ready for wear and instead are placed flat against the frame backing with the medal ribbon secured through a slot. This means that the medals cannot be removed from the frame and cannot be worn.
For medals that were issued prior to January 1st 2009 we engrave them as follows using capital letters and full stops as appropriate;
SERVICE NUMBER RANK INITIALS SURNAME SERVICE or ARMY REGIMENT
For medals that have been issued after January 1st 2009(1) we engrave as follows;
RANK INITIALS SURNAME (Post Nominal) SERVICE SERVICE NUMBER
PLEASE NOTE – IF YOU DO NOT WISH US TO ENGRAVE THE MEDAL USING THE ABOVE PROTOCOL, THEN YOU MUST SPECIFY EXACTLY HOW YOU WISH US TO ENGRAVE THE MEDAL IN THE “Additional Comments” TEXT AREA AT THE END OF EACH PURCHASING FORM.
Engraving on medals is limited to 45 characters including spaces and full stops.
Bigbury Mint use the diamond drag method of engraving, an example of which is shown here.
(1) JSP761 – Honors and Awards in the Armed Forces V4.0 Dec 14 – Annex C to Chapter 12
All prices are shown inclusive of Value Added Tax (VAT) at 20%.
If you are purchasing from a location where VAT does not apply, the checkout process will recognise this when your address details are entered and deduct VAT appropriately. When you have added an item to your basket you can “Calculate Shipping” for your given location. When you click “Update Totals” the prices will be recalculated for you.
Should you have any questions about VAT, please CONTACT US
Reviews
There are no reviews yet.